Stainless Steel No Hub Coupling size 2″
No Hub Coupling size:1 1/2″ 2″ 3″ 4″ 5″ 6″ 8″ 10″ 12″ 14″
No Hub COMPONENTS Material:
Clamps: 301 Series Stainless Steel, Worm Drive (2 or 4)
Shield: 301 Series Stainless Steel
Gasket: Molded, one-piece, elastomeric sealing gasket
No Hub Coupling Size 2″
No-Hub couplings have an inner gasket made of a synthetic rubber compound, polychloroprene (neoprene),EPDM,NBR. The inner gasket is surrounded by an outer stainless steel shield or band with stainless steel worm clamps strategically riveted to the shield to keep them in place. Series 300 stainless is used for corrosion resistance. With the use of a No-Hub Torque Wrench, the installer applies 60 inch-pounds torque to the 5/16″ hex-head screw for optimum and proper assembly.
Standard No-Hub Coupling
- 5/16″ hex-head screw applies 60 in.-lbs. of installation torque to the band/shield assembly.
- Standard No-Hub Couplings conform to CISPI 310. Couplings comply with ASTM C 1277. Gaskets are made from an elastomeric compound that meets the requirements of ASTM C 564.
Standard No-Hub Coupling Feature:
- Patented Bi-Directional Shield Design
- Connects Cast Iron Pipe to Cast Iron Pipe
- Specially Beaded Gasket
- Interlocking Clamp Design
- Floating Eyelet Design
Stainless steel 301 No Hub Coupling size:
| Standard No-Hub coupling | ||||
| Part No | mm | inch | Clamps Per Coupling | pcs/carton |
| NHC40 | DN40 | 1.5″ | 2 | 100 |
| NHC50 | DN50 | 2″ | 2 | 100 |
| NHC75 | DN75 | 3″ | 2 | 100 |
| NHC100 | DN100 | 4″ | 2 | 100 |
| NHC125 | DN125 | 5″ | 4 | 50 |
| NHC150 | DN150 | 6″ | 4 | 50 |
| NHC200 | DN200 | 8″ | 4 | 30 |
| NHC250 | DN250 | 10″ | 4 | 25 |
| NHC300 | DN300 | 12″ | 6 | 16 |
| NHC400 | DN400 | 16″ | 6 | 8 |
Stardard No-Hub Coupling in production:
To get stainless steel No-Hub Coupling 2″ price and samples,Contact with our sales:
Email:sales@techiclamp.com
Whatsapp:+86-18522569512
Skype:techi-part
