Constant Tension Clamp with Washer Size 45-67mm
Material:
W2/SS304:AISI304 band and housing,AISI410 washers,Galvanized steel screw
Suggested install torque:
14.2mm band clamp:7.5NM
15.8mm band constant tension clamp:11NM.
W4/SS304:AISI304 band housing and screw,AISI410 washers
Suggested install torque:
14.2mm bandconstant tension clamp with washer and screw clamp:7.5NM
15.8mm band constant tension clamp:11NM.
Constant tension clamp with washer size 45-67mm W2 W4
Techi industrial produce constant tension worm drive hose clamp 14.2mm(5/8″) band,15.8mm(9/6″) band, Constant Tension Clamp with Washer and Liner W2 W4, High torque/High-Torque Constant Tension Hose Clamp with Washer and Liner,Constant tension worm drive hose clamp with washer AISI301 AISI304,Constant tension clamp with washer and screw 45-67mm 1-3/4″ to 2-5/8″.
Constant tension hose clamp with washer AISI310 AISI304 Material:
W2/SS304:AISI304 band and housing,AISI410 washers,Galvanized steel screw
Suggested install torque:14.2mm band clamp:7.5NM, 15.8mm band clamp:11NM.
W4/SS304:AISI304 band housing and screw,AISI410 washers
Suggested install torque:14.2mm band clamp:7.5NM, 15.8mm band clamp:11NM.
| Material | Band | Housing | Washer | Screw |
| W2 | AISI 301SS/304SS | AISI 301SS/304SS | AISI 410SS | Galvanized steel |
| W4 | AISI 301SS/304SS | AISI 301SS/304SS | AISI 410SS | AISI 301SS/304SS |
Constant tension clamp 14.2mm band W2 W4 size and drawing:
| Constant tension clamp 15.8mm(5/8″) band size |
Item No. | Recommended Tightening Torque |
||
| mm | inch | W2 | W4 | W2,W4 |
| 26-45 | 1″ 1-3/4″ | W2CT-2645 | W4CT-2645 | 11NM |
| 32-54 | 1-1/4″ 2-1/8″ | W2CT-3254 | W4CT-3254 | |
| 45-67 | 1-3/4″ 2-5/8″ | W2CT-4567 | W4CT-4567 | |
| 57-79 | 2-1/4″ 3-1/8″ | W2CT-5779 | W4CT-5779 | |
| 70-92 | 2-3/4″ 3-5/8″ | W2CT-7092 | W4CT-7092 | |
| 83-105 | 3-1/4″ 4-1/8″ | W2CT-83105 | W4CT-83105 | |
| 96-118 | 3-3/4″ 4-5/8″ | W2CT-95118 | W4CT-95118 | |
| 108-130 | 4-1/4″ 5-1/8″ | W2CT-108130 | W4CT-108130 | |
| 121-143 | 4-3/4″ 5-5/8″ | W2CT-121143 | W4CT-121143 | |
| 134-156 | 5-1/4″ 6-1/8″ | W2CT-134156 | W4CT-134156 | |
| 146-168 | 5-3/4″ 6-5/8″ | W2CT-146168 | W4CT-146168 | |
| 159-181 | 6-1/4″ 7-1/8″ | W2CT-159181 | W4CT-159181 | |
| 172-194 | 6-3/4″ 7-5/8″ | W2CT-172194 | W4CT-172194 | |
| 184-206 | 7-1/4″ 8-1/8″ | W2CT-184206 | W4CT-184206 | |
| 197-219 | 7-3/4″ 8-5/8″ | W2CT-197219 | W4CT-197219 | |
| 210-232 | 8-1/4″ 9-1/8″ | W2CT-210232 | W4CT-210232 | |
Constant tension worm drive clamp with washer and liner factory and production lines:
